Tire Maxxis High Roller 3 27.5X2.4 F60Tpi 3C Maxxgrip Exo+ TR WT

*Photos are of the High Roller 2, photos of the High Roller 3 are not available yet.

The legendary High Roller returns with an all-new hybrid tread design, built to take on mixed conditions at high speeds. The center tread uses a mid-spike design similar to the Shorty but with a lower knob height. These knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces. Cornering traction is enhanced via large, well-supported side knobs for predictable handling.

• 3C MaxxGrip : uses the softest rubber compounds to offer the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications.
• 60 TPI casing
• Wide Trail (WT) : construction optimizes the tire’s tread layout and profile on today’s modern, wider rims. WT tires are optimized for a 35mm inner rim width but are proven to work over a range from 30-35mm inner rim widths, depending on the rider’s preference.
• EXO+ : combines two of our best puncture protection materials: SilkShield and EXO. The SilkShield layer runs from bead-to-bead with a layer of EXO along the sidewalls. Combined, these two materials create EXO+ which improves tread puncture protection by 27%; sidewall durability by 51%; and resistance to pinch flats by 28%.
• Tubeless Ready (TR) : Tubeless tires provide the rider with many benefits: the ability to run lower air pressures, which improves traction; lower rolling resistance when compared to a tube-type tire; and less chance of flatting because there is no tube. Liquid sealants should only be used in the following types of tires: tubeless road, tubular, and tubeless ready.
  

Category: Trail, Enduro, Downhill

Recommended use: Loose trail conditions

Recommended installation: Front or Rear